HLS直线加速器调制器系统设计与改造

介绍了合肥同步辐射光源速调管调制器改造项目.在新的设计中采用了开关型恒流PFN充电电源,计算了充电参数,建立了主放电回路的仿真模型,重点分析了电路中反向电压问题,依据仿真结果及分析设计了反向保护电路.给出了运行中的主要波形.最后介绍了新的调制器控制系统.     

基于CCD图像的火灾空间定位方法

大空间中火源的空间位置的定位,一直是火灾自动探测与自动扑救中的难点。研究了一种利用单一CCD摄像头进行火灾自动空间定位的方法。根据计算机视觉原理,利用固定在自动消防水炮末端的CCD摄像头随水炮旋转扫描时的角度、位移变化,将CCD摄像头在不同位置所拍摄的图像中火源图像坐标和火源的空间坐标建立联系,从而实现了火源空间位置的自动定位。     

风力发电机组变速恒频控制系统研究

全面介绍了一种最新应用于风力发电中的新型电机—无刷双馈电机，并分析了这种新型电机作变速恒频运行的原理并对这种电机进行了动态特性仿真研究，给出了形式简洁的控制方程和易于实现的控制方案。     

光突发交换的交换控制策略和光缓存配置

光突发交换是面向下一代互联网的光交换模式.讨论了异步光突发交换系统的交换控制策略以及相应光缓存的优化配置策略.除了传统预约模式的交换策略,还研究了非预约和改进型预约模式,它们的性能评估由计算机仿真给出.结果表明:在条件相当情况下,改进型预约模式具有最低的丢包率.同时光缓存的配置对上述几类交换控制策略的性能都有很大影响,仿真结果指出:光缓存的粒度对系统性能具有重要影响,所讨论的几类交换模式都存在最佳时延粒度,研究结果对光交换矩阵的设计有指导意义.     

具有算子与有界约束的无穷维规划问题的最优性条件

本文给出了当all-at-once方法用于求解最优控制问题而产生的一类同时具有算子和对部分变量具有简单界约束的无穷维最优化问题的一个一阶必要条件,构造了相应的信赖域子问题,据此,信赖域法可以用于求解无穷空间中的最优化问题。     

基于CSCW的协同编著系统的设计

讨论了计算机支持的协同工作(CSCW)的主要技术，其中重点讨论了协同编著系统设计中的并发控制技术，指出了其与传统的并发控制技术的区别。根据CSCW的基本原理设计出了一个基于Browse／Server结构的协同编著系统的系统模型。该系统模型比传统的模型更加方便了用户之间通过Internet的浏览器进行协作。     

On the structure of the optimal server control for fluid networks

This paper derives the optimal trajectories in a general fluid network with server control. The stationary optimal policy in the complete state space is constructed. The optimal policy is constant on polyhedral convex cones. An algorithm is derived that computes these cones and the optimal policy. Generalized Klimov indices are introduced, they are used for characterizing myopic and time-uniformly optimal policies.Received: November 2004 / Revised: February 2005The research of this author has been supported by the project ‘‘Stochastic Networks’’ of the Netherlands Organisation for Scientific Research NWO.     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004